E2644A 0.65 mm Wedge Probe Adapter for TQFP and PQFP, 16 Signal, qty 1

Загрузить техническое описание

The Keysight E2644A is a wedge probe adapter. If you've ever tried to probe a surface mount component, you've probably experienced one or more of the following frustrating situations: accidentally shorting IC pins together; electrical and/or mechanical problems with soldering small wires onto leads; and/or holding multiple probes and trying to use your scope at the same time. The Keysight Wedge Probe Adapter provides a solution to these frustrations.

It is easy to insert and stays put - no need to solder small wires onto leads. The Wedge is mechanically non-invasive, so you won't damage the legs of the IC. It makes two contact points with each leg of the IC. This redundant physical connection increases the electrical reliability of the connection.

• Easy connection to surface mount ICs
• Safe, with no chance of shorting
• Mechanically non-invasive contact
• Operating voltage: less than 40 V (dc + peak ac)
• Operating current: 0.5 A maximum
• Capacitance between contacts: 4.3 pF at 1 MHz
• Self-inductance: 37 nH at 1 MHz
• Contact resistance: less than 0.1 Ohm